Cisco Systems 7936 Conference Phone User Manual


 
11
Note Be sure to review the “Package Contents” section on page 2 and the “Safety Notices” section
on page 3. Also read the Regulatory Compliance and Safety Information for the
Cisco Unified IP Phone 7900 Series, along with the Release Notes for
Cisco Unified IP Conference Station 7936. See the “Related Documentation” section on
page 17 for a list of relevant documentation.
Before You Begin
To ensure a successful installation, verify with your system administrator that the network is ready for
the IP Conference Station and that Cisco Unified CallManager is installed and configured for the
IP Conference Station.
Installing and Connecting the IP Conference Station to the Network
Refer to Figure 1 on page 12 and Figure 2 on page 13 when you are installing the IP Conference
Station.
Figure 1 shows the various components and power and cable connections used on the
Cisco Unified IP Conference Station 7936.
Figure 2 shows the optional, external microphones and their connection to the external
microphone jacks on the bottom of the Cisco Unified IP Conference Station 7936.
Note Daisy-chaining Cisco Unified IP Conference Stations to other Cisco Unified IP Phones is not
a supported configuration and will not work.