Filter
Top Products
13
Figure 2 External Microphone Connections on the Cisco Unified IP Conference Station 7936
Perform these steps to install and connect the IP Conference Station to the network.
Step 1 Place the IP Conference Station on a flat surface, for example, a conference room table or
desktop.
Step 2 Connect one end of the 6-foot CAT 5 cable to your data network port and connect the other
end to the network (LAN) port on the PIM.
Step 3 Connect the free end of the 25-foot CAT 5 cable to the RJ-45 port on the bottom of the
IP Conference Station. (The cable is preplugged into the PIM.)
1
Connect one end of the external
microphone cable to the jack on the
underside of the external microphone.
2 Connect the other end of the external microphone
cable to the external microphone jack on the
underside of the IP Conference Station 7936.
105036
2
1
2
1