Cisco Unified IP Phone 7905G and 7912G for Cisco Unified CallManager 5.0 (SCCP) 1
Getting Started
Using this Guide
This guide provides you with an overview of the features available on your phone. You can read it
completely for a solid understanding of your phone’s capabilities, or refer to the table below for
pointers to commonly-used sections.
If you want to... Then
Review important safety information See the “Safety and Performance Information” section on
page 2.
Use your phone after someone else has
installed it for you
Start with the “An Overview of Your Phone” section on
page 16.
Connect your phone to the network See the “Connecting Your Phone” section on page 13.
Learn about the buttons and softkeys See the “Understanding Buttons and Hardware” section on
page 16.
Make calls See the “Placing a Call” section on page 21.
Put calls on hold See the “Using the Hold Button” section on page 25.
Transfer calls See the “Transferring a Connected Call” section on page 25.
Make conference calls See the “Making Conference Calls” section on page 26.
Answer calls ringing on another phone See the “Picking Up a Redirected Call on Your Phone”
section on page 32.
Change the ringer or call volume See the “Adjusting the Volume” section on page 38.
Choose a different ring sound See the “Customizing Rings” section on page 39.