Cisco Systems 7905G IP Phone User Manual


 
Basic Call Handling
Cisco Unified IP Phone 7905G and 7912G for Cisco Unified CallManager 5.0 (SCCP) 21
Basic Call Handling
This section covers basic call-handling tasks such as placing, answering, and transferring calls.
Placing a Call
To place a call, use one of several options to go off-hook before or after dialing a number.
If you want to... Then...
Dial off-hook Lift the handset and dial the number.
Dial on-hook (without
dial tone)
Enter or choose a phone number by:
Entering a phone number on the keypad.
Pressing the Navigation button to access and choose phone numbers
from your list of speed dial numbers.
Then, to place the call, do one of these things to go off-hook:
Lift the handset.
Press Dial.
Dial on-hook (with dial
tone)
Press NewCall and dial the number.
Redial the most
recently dialed number
Press Redial.
Speed dial a number Do one of the following:
Press the Navigation button to choose a number from your list of speed
dial numbers and then press Dial.
Press the Menu button and select Directories > Speed Dials. Select a
number to dial.
Enter a speed dial index number (1-99 on the keypad) while on-hook
and press AbbrDial.
For details, see the “Speed Dialing” section on page 30.
Dial from a call log Press the Menu button and select Directories > Missed Calls, Received
Calls, Placed Calls, Speed Dial, or Directory Services. To dial from a listing,
scroll to it and go off-hook.
To add a prefix or other digits to the number before dialing, press EditDial.