Filter
Top Products
22 OL-8166-01
Dial from a corporate
directory
Press the Menu button and select Directories > Directory Services >
Corporate Directory. Search for a listing by using your keypad to enter
letters. (You can search using a partial name.) Press Submit. To dial from a
listing, scroll to it and go off-hook.
Dial from a corporate
directory web page
Use the Cisco Webdialer feature. Open a web browser and go to your
company directory. Click on a phone number in the directory. Click Dial to
place the call. Click Hangup to end the call.
Place a call when
another call is active
Press the Hold button. Then dial, redial, or speed dial a number.
Receive notification
when a busy or ringing
extension becomes
available
Call the number and press CallBack while listening to the busy tone or ring
sound. Hang up. When the extension becomes available, your phone will
provide you with an audio and visual alert. (The call back to this number
is not automatic; you must place the call.) To view the status of call back
notification, press CallBack while the phone is idle. To cancel call back
notification, press Cancel.
CallBack is a special feature that your system administrator might
configure for your phone. You will not have access to this feature by
default.
Make a priority
(precedence) call
Enter the MLPP access number (which is provided by your system
administrator) followed by the phone number. For more details, see the
“Prioritizing Critical Calls” section on page 35.
Dial from a Personal
Address Book (PAB)
entry or Fast Dial code
Press the Menu button and select Services > PABookService or My Fast Dial
(exact names might vary). To dial from a listing, scroll to it and go
off-hook.
For help subscribing to the PAB or Fast Dial service, see the “Using
Personal Directory on Your Phone” section on page 42.
Place a call using a
billing or tracking code
Dial a number and enter a client matter code (CMC) or a forced
authorization code (FAC) when prompted by a distinctive tone. Your
system administrator will tell you if you need to enter CMC or FAC codes
and can provide you with detailed instructions.
Place a call using your
Cisco Extension
Mobility profile
Make sure that you are logged in to Extension Mobility (EM). Press the
Menu button
and choose Services > EM Service (exact name might vary),
then use your keypad to enter login information. If you are sharing a
phone, you might need to log in to EM before you can access certain
features or complete a call.
EM is a special, non-default feature that your system administrator can
assign to phones and phone users.
If you want to... Then...