Cisco Systems 7905G IP Phone User Manual


 
24 OL-8166-01
Ending a Call
To end a call, hang up the handset or press EndCall.
Note If you press End Call, you do not have to put the handset back in the cradle to end the call.
When the handset in not in the cradle, the off-hook icon will appear on the screen although
there are no active calls.
Using the Speaker
The Cisco Unified IP Phone 7905G and 7912G each provide a speaker for hands-free listening. You
can use the speaker only to listen to a call. To talk on a call, you must pick up the handset.
Tip If you system administrator has disabled the speaker on your phone, the Monitor and MonOff
softkeys will not be available to you. You must lift the handset to place and monitor calls.
Use your phone to answer a call
that is ringing on another phone
Use Call Pickup. See the “Understanding Shared Lines” section on
page 33.
Send an incoming call directly to
the voice messaging system.
Press iDivert. The incoming call automatically transfers to your
voice message greeting.
If you want to... Then...
Listen to the other party on the
speaker
Press Monitor and then hang up the handset. You will be able to
hear the call but you will not be able to talk on the call.
Listen to the other party using the
handset
Lift the handset or press MonOff.
Turn off the speaker and hang up Press EndCall.
Adjust the volume on the speaker Press the up or down Volume button when the speaker is in use.
If you want to save the speaker volume setting, press Save.
If you want to... Then...