Filter
Top Products
Using the Cisco SPA 500S Attendant Console
Connecting the Cisco SPA 500S Attendant Console to the IP Phone
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 84
6
!
CAUTION Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA 500S.
STEP 7 Locate the AUX OUT port on the back of the first Cisco SPA 500S. Connect one
end of the auxiliary cable to this port.
STEP 8 Locate the AUX IN port on the back of the second Cisco SPA 500S. Connect the
other end of the auxiliary cable to this port.
STEP 9 Route the auxiliary cable inside the cable slot. The Cisco SPA 500S is powered by
the auxiliary cable with the IP phone; no additional power source is required.
STEP 10 Attach the appropriate desktop stands to each unit.