Filter
Top Products
Using Basic Phone Functions
Turning Call Waiting On and Off
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 39
3
Using the Setup button:
You can also access Do Not Disturb by performing the following steps:
STEP 1 Press the Setup button and select Preferences > Do Not Disturb.
STEP 2 Press the edit softkey.
STEP 3 Press y/n to choose y, then press ok.
STEP 4 Press save.
Using the star code:
Enter *78 to activate Do Not Disturb.
Deactivating Do Not Disturb
Using the -dnd softkey:
To deactivate Do Not Disturb, press the -dnd softkey.
Using the Setup button:
You can also deactivate Do Not Disturb by pressing the Setup button and
selecting Preferences > Do Not Disturb.
Using the star code:
Enter *79 to deactivate Do Not Disturb.
Turning Call Waiting On and Off
Call waiting alerts you when you are on a call by ringing your phone and displaying
a status message that another call is ringing. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
You can also turn call waiting on and off from your PC using the IP Phone Web
Interface. See the “Configuring Call Waiting” section on page 70.