Filter
Top Products
TS-100 Owner’s Manual
00
- END OF LIST -
CALL#
AM
8:59 8/24
NEW
06
765-555-1234
JOHN SMITH
RPT
CALL#
REPEAT SYMBOL
NEW SYMBOL
AM
8:59 8/24
NEW
05
TOTAL CALLS 06
CALL#
AM
8:59 8/24
NEW
06
TOTAL CALL 08
NEW SYMBOL
TOTAL NEW CALLS
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will show the
NEW symbol, the phone number, the caller s name, and time and date of the call for
20 seconds. The RPT (repeat) symbol will appear if the call has come in more than
once.
2. After 20 seconds with no activity, the display will default to the Stand-By screen and
remain on until another call is received or a button is pressed.
REVIEWING CALLS
1. When the NEW symbol is flashing on the Stand-By screen, you have new incoming
calls. Next to the NEW symbol is the total number of new calls. Press the REVIEW UP
( ) or REVIEW DOWN ( ) button to review the incoming stored calls.
2. The NEW symbol attached to each call will be removed after you review the call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-By
screen, there are new calls that you have not yet reviewed.
4. The reviewed number can be stored into any of the auto memory buttons or keypad
memory locations by pressing the STORE button first, then one of the memory buttons
5. When you have reached the end of the call records, the display will indicate [-END
OF LIST- ] , confirming there are no more calls stored.
Note: If the telephone number received is more than 10 digits, the unit will
only store the first 10 digits into memory.
Caller ID Features
12