Filter
Top Products
TS-100 Owner’s Manual
Telephone Features
PULSE AND TONE DIALING
1. If your telephone line accepts a touch-tone dialing, set the PULSE/TONE switch to
the Tone position. In order for the phone to function properly with TalkSwitch, this
switch must be set to Tone. If your telephone line requires a rotary (pulse) dialing,
set the PULSE/TONE switch to the Pulse position.
Note: In order for the Caller ID callback to work (see Using the Caller ID
Function), you must set the PULSE/TONE switch to the Tone position.
RECEIVING A PHONE CALL
1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the caller’s information shows on the display window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKERPHONE
button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be interrupted by
the phone ringing. Remember to set the ringer switch back to Hi or Low when you
want to receive calls again.
PLACING A PHONE CALL
1. Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the display
window.
SPEAKERPHONE BUTTON
(AC Adaptor must be used to ensure proper function)
1. Receiving Incoming Calls
a. When the phone rings and the callers information shows on the display window
(refer to Using the Caller ID Function), press and release the Speakerphone
button and talk normally into the built-in microphone from a distance of 5-6
inches.
b. You can adjust the volume of the caller s voice by sliding the VOLUME CONTROL
on the right side of the phone.
c. After the conversation has finished, press the SPEAKERPHONE button to hang
up.
2. To Make A Call
a. Press and release the SPEAKERPHONE button.
b. When you hear a dial tone, dial the number or press the auto memory button just
as you would on any other push-button telephone. The number will appear on
the display window.
c. When your party answers, adjust the sound level of his or her voice by sliding
the VOLUME CONTROL located on the right side of the phone.
d. After the conversation has finished, press SPEAKERPHONE to hang up.
4