Filter
Top Products
TS-100 Owner’s Manual
HEADSET COMPATIBLE
This telephone will accept a 2.5mm cell phone-style headset or an RJ-type headset. To
enable headset mode, move the switch on the right side of the phone (see Page 7 for
switch location) to the ON position. The SPEAKERPHONE button is used to connect or
disconnect from a call.
Note: With the headset switch turned to the ON position, the speakerphone
feature will be disabled.
DATA PORT
This is a connection which is in parallel with the telephone line. It allows the connection
of a device such as a modem, caller ID, or an answering machine.
CALL WAITING DISPLAY
Call Waiting Caller ID tells you there is another call waiting, and lets you know who the
caller is before you answer it. The call waiting information will be shown on the unit’s
display.
The CALL WAITING (CW) symbol will flash for 16 seconds along with the telephone
number and name of the person who is on call waiting. If connected to TalkSwitch, press
the FLASH button twice quickly to put the existing call on hold and answer the new call.
Note: It is recommended that you do not use Call Waiting in conjunction
with TalkSwitch as it is impossible for the system to handle a second
call automatically while the 1st call is being handled by the system.
PM
8:59 9/24
NEW
36
555-1234
JACK SMITH
CALL#
+9
CALL WAITING SYMBOL
Telephone Features
7