Filter
Top Products
Freelance 3000 user guide ~ 2nd Edition ~ 11th October ’04 ~ 6397
54
To de-register a BT Freelance
XA 3000 additional handset from
the base
Press the ߜ button to enter
the menu.
Use the DOWN button to
scroll to SETUP and press the
ߜ button.
Use the DOWN button to
scroll to DEL HS and press
the ߜ button.
The display will show PIN?
Enter your 4-digit PIN.
Press the ߜ button.
Use the UP or DOWN button
to select the handset you want
to de-register (HANDSET 1-5).
Press the ߜ button. Display
shows CONFIRM?.
Press ߜ. You will hear a
confirmation beep.
Once de-registered, the
handset will display NOT REG.
that are flashing indicate
other bases that the handset is
already registered to).
Enter the base number
(BS 1-4) that you want to
register the handset to.
Enter your 4-digit PIN
(original factory setting OOOO)
and press the ߜ button.
The display will show
SEARCH 1, 2, 3, 4 and the
symbol will flash as the
handset tries to locate the base.
When the handset locates
the base, the handset will be
automatically selected and
shown on the display.
Note
Handsets can only be de-registered
via another handset.
Note
Your 4 digit PIN number is 0000
unless you have previously allocated
a new PIN number as explained on
page 29.
Note
If the handset does not locate the
base, the handset will return to
the previous menu. Try to register
again by using a different
available base number. Ensure
that you are in close vicinity of
the base).
ADDITIONAL
M
e
n
u
M
e
n
u
M
e
n
u
M
e
n
u
M
e
n
u
R
e
d
i
a
l
C
a
l
l
s
M
e
n
u
R
e
d
i
a
l
C
a
l
l
s
R
e
d
i
a
l
C
a
l
l
s