Filter
Top Products
Freelance 3000 user guide ~ 2nd Edition ~ 11th October ’04 ~ 6397
15
SETTING UP
6 To set the day and time
The message counter on the
base unit will flash between
0 and C until the day and time
are set.
The day and time must be
set using the BT Freelance XA
3000 handset.
Your BT Freelance XA 3000
automatically adds the day
and time to all messages and
memos received.
When you first switch the
power on, the clock is set to
Sunday, 12.01pm. You can
change the day and time as
required.
Press the ߜ button twice on
the BT Freelance 3000 handset.
TAM MENU will flash on the
display.
Press the 0 button. The prompt
will announce, “To set day and
time press
✱
, to hear day and
time press
#
”.
(Please note that if you press
the
#
button this will only allow
you to check the day and time.)
Important
The main menu announcements
are automatically announced
through the handset earpiece when
the ߜ button is pressed twice.
Press the
✱
button. The prompt
will announce, “Please enter
new day and time after the tone”.
After the tone enter the day,
followed by the time using the
24 hour clock.
1 = Sun, 2 = Mon,
3 = Tues, 4 = Wed,
5 = Thur, 6 = Fri, 7 = Sat.
For example:
1 1415 = Sunday 2.15pm.
Or
5 0915 = Thursday 9.15am.
You will then hear your setting
confirmed.
Press the
✘ button twice to
return the handset to standby.
Note
If the day and time is entered
incorrectly, the prompt will announce,
“Incorrect, please set again”. Enter
the correct setting within 15 seconds
otherwise the handset will return to
standby mode. If the day and time
is entered incorrectly three times the
handset will return to standby.
Note
If you have any difficulties setting up
your BT Freelance XA 3000 please
call the Helpline on 0870 605 8047.
S
e
c
r
e
c
y
M
e
n
u
M
e
n
u
ᮣ