Filter
Top Products
Freelance 3000 user guide ~ 2nd Edition ~ 11th October ’04 ~ 6397
35
Message display on the
base station
The table opposite provides an
explanation of what is shown on the
base station display.
Your BT Freelance XA 3000 can
digitally record up to 12 minutes of
messages, with each message lasting
a maximum of 3 minutes. As well as
recording incoming messages, you
can record memos for other users.
You can operate your BT Freelance
XA 3000 from:
• The base unit.
• The handset.
• Remotely from any external
Touchtone
TM
telephone.
Your BT Freelance XA 3000 comes
with two pre-recorded outgoing
messages, Answer and Record or
Answer Only, but if you wish you can
record your own.
You will need to set the day and
time (if you have not already done so)
so that you will know when each
message was received, see page 15.
Setting up and personalising
your answering machine
OGM
Page
Stop
Skip Skip
Play
Del
Ans.
On/Off
Messages
Power /
In Use
Charging
BT Freelance XA 3000
DISPLAY DEFINITION
(Blank)
Power off.
C-0(flashing)
Day/Time needs to be set.
0-9
Answer-on mode, 0-9
messages.
9 (flashing)
10-59 messages. Indicating
more than 9 messages stored.
––
Power on, but set to answer off
Alternating
mode. The display flashes
with
between a dash and the number
0-9
of messages saved in the memory.
A (flashing) Handset menu and
Remote
access in progress.
E (flashing)
Error.
F (flashing)
Memory full.
P (flashing)
Message paused.
P-1:
When selecting or playing
Alternating
Answer & Record outgoing
between P&1
message.
P-2:
When selecting or playing
Alternating
Answer Only outgoing
between P&2
message.
r (flashing)
Message recording (memo,
outgoing message or incoming
message).
t or 2 to 9
Setting or reading answer delay.
8-0
Counting down.
ANSWER MACHINE