Filter
Top Products
Freelance 3000 user guide ~ 2nd Edition ~ 11th October ’04 ~ 6397
16
SETTING UP
Please see the table below for your
BT Freelance XA 3000 default settings.
If you wish to personalise your
answering machine settings, for
example record your own outgoing
message etc, please see “Setting up
and personalising your answering
machine” beginning on page 35.
The answering machine will now be
switched ON and set to its default
settings so your BT Freelance XA 3000
is now ready for use.
BT
Freelance XA 3000 Default
Settings Table
Feature Default Setting
Day/Time Stamp Sunday 12:01 pm
Answer Delay Your answering
machine will answer
after 6 rings
Audible Message
Alert Tone
OFF
Outgoing Message Answer and Record
“Hello your call cannot
be taken at the
moment so please
leave your message
after the tone.”
Answer Mode ON
Base ringer level High
Base loudspeaker
volume
Level 5
PIN code 0000
Dialling mode Tone
If you wish to register additional
handsets, please see page 53.
Additionally, if you have
purchased a BT Freelance XA
3000 multiple pack you will
need to do the following for
each additional handset:
1. Connect the power supply to the
charger (item code 021299).
Plug the power adaptor into the mains
power socket on the underside of the
charger.
Plug the adaptor into the mains power
supply and switch on.
2. Install the rechargeable batteries in
the handset.
3. Charge the handset batteries for at
least 16 hours.
Note
The charger must be plugged into the
mains power socket at all times.