BT X10 Cordless Telephone User Manual


 
WARNING
Do not place your BT Diverse X10 in
the bathroom or other humid areas.
Handset range
The handset reception range from
the base is up to 300m outdoors
and up to 50m indoors, in ideal
conditions.
IMPORTANT
The base station must be plugged
into the mains power socket at all
times.
Do not connect the telephone line
until the handset is fully charged.
Which socket?
Power socket
Telephone line socket
Location
You need to place your BT Diverse X10 close enough to
the telephone and mains power sockets so that the
cables will reach.
The strength of the handset signal depends on where you
site the base. Putting it as high as possible can help to
provide the best signal. Make sure it is at least 1 metre
away from other electrical appliances to avoid interference.
Setting up the base
1. Plug the power adaptor cable into the back of the base.
Plug the power adaptor into the mains wall socket and
switch the power on. When the power is connected
correctly, the red Power light on the base comes on.
BT Diverse X10 – Issue 2 – Edition 02 – 29.10.03 – 5737
Getting started6
Power adaptor cable
5737 Diverse X10 UG [Iss2-1] 5/3/04 10:34 am Page 6