Filter
Top Products
14 Startup
Using the stylus
The stylus works like a mouse on a PC. You can use the stylus to point and click various
objects on the screen. The following are basic stylus techniques you should learn in order to
operate your PDA phone efficiently.
• Ta p - Touch the screen once with the stylus to open items and select options.
• Drag - Hold the stylus on the screen and drag it across the screen to select text and images.
Drag in a list to select multiple items.
• Tap and hold - Tap and hold the stylus on an item to see a list of actions available for that
item. Before a pop-up menu appears, you will see a blue circle of dots to notify you of where
on the screen you are pressing. On the pop-up menu that appears, tap the action you want
to perform.
Sleep mode
Once the PDA phone is on, you can press Power to put it in sleep mode. During sleep mode,
the screen shuts off and the system stands by for incoming phone calls or user input. Pressing
Power will switch ON the phone again.
• Please note that your PDA phone needs about 5 seconds to finish the booting procedure. If
you want to switch the power off right after you power it on, please wait for 5 seconds before
powering off your PDA phone.
• The PDA phone will automatically enter sleep mode if it is inactive for 3 minutes. You can
also customise the length of inactivity before entering sleep mode.
• See "Backlight" on page 31 and "Power" on page 34 for more on power management.
Deep sleep mode
The PDA phone will go into deep sleep mode under two situations:
1. The battery lock is not in the lock position. In other words, the battery is not locked.
2. The battery capacity is low.