Filter
Top Products
Routing calls
46
Making calls with ease
b) Routing calls from an internal subscriber (Route from, follow-me)
Press Star, 70.
Enter the dial code for the call diversion option, e.g. 1.
Dial codes for call routing variations:
1 = immediately - 2 = on no answer - 3 = on busy
Enter the two- to four-digit internal number for the subscriber from whom the
calls are to be routed. You hear the acknowledgement tone.
c) Deactivate call divert/twinning
Press the hash key and then 70 for "Route from".
or
Press the hash key, then 71, for "Call routing to".
You will hear an acknowledgement tone. The call routing is deactivated.
i
Notes
• "Changing call divert remotely" must be approved by your system administrator.
They will also tell you the number to dial for remote settings access.
• If you have a telephone system with a multi-port connection, dial the MSN number
for remote settings access directly. You can get this from the Service department.
•The Personal Identification Number (PIN) (
→
p. 63) of the subscriber must differ
from the default factory setting.
• For "Call diversion to": You do not need to enter an external number if you are cal-
ling from the same external telephone to which you want to route your calls. Howe-
ver, number transmission (caller ID) must be active for that telephone.