Filter
Top Products
Changing general settings
112
Customizing the telephone
Setting up headset*
You can set whether you want to use a connected headset.
You can set the default volume for a headset connected to the headset link.
You can set side tone and a wake-up tone for all headsets.
i
Note
• Notes onoperating the headset (
→
p. 144) can be found in the chapter on add-on
equipment.
Headset - enabling/disabling use*
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Applications menu item.
Confirm your selection.
Scroll to the Headset menu item.
Confirm your selection.
Scroll to the Headset menu item. The right margin of the window will either show
the link slot in which you can use a connected headset (e.g. slot 1), or not (off).
Press several times if needed. Select the link slot in which the link with the con-
nected headset is plugged, or switch headset use to "(off)".
Exit menu. The new setting is saved.
i
Note
• If you have enabled use of the headset, the Monitoring/handsfree function key will
have a modified function (
→
p. 144).
• If you have plugged in a headset link, only that slot will be presented as an option
for headset use.
• When two CTI/Audio links are plugged in and you specify the wrong slot, you can-
not use the headset.
• The inner slot is slot 1.