Filter
Top Products
PARTNER
®
Advanced Communications System
15
Form C—Extension Settings: Feature Descriptions
Feature Descriptions—(Continued) 0
# F
EATURE DESCRIPTION
Ext. 10
Only
Button Light
Required
Button Light
Recommended
36 Last Number
Redial
Redials the last outside number dialed (maximum 28 digits). This feature is useful for immediately
redialing a busy number.
37 Manual Signaling This feature applies only to PARTNER and MLS-model phones. This feature lets you program a
button on your PARTNER or MLS-model phone that you can use to signal a predetermined co-
worker’s extension.
38 Message Light On Turns on the message light at a specified extension (where XX is a system extension number).
39 Message Light Off Turns off the message light at a specified extension (where XX is a system extension number).
40 Recall Causes the system to send a timed switchhook flash over the telephone line to recall a new dial
tone or to access a PBX, central office, or Centrex feature, such as Call Waiting.
41 Save Number
Redial
This feature is available only on system phones. This feature saves into temporary memory the
last outside number (up to 28 digits) dialed from an extension with a system phone.
42 Simultaneous
Paging
Accesses the loudspeaker paging system, if you have one connected to the system through the
PAGE jack on the primary processor module, and all of the idle system phones with speakers
assigned to Calling Group 1.
43 Station Lock This feature is available only on system and standard touch-tone phones. This feature lets users
enter a four-digit code on their telephone dialpad to lock their extension. ●
44 Touch-tone Enable This feature is available only on system phones. This feature lets a system phone user send
touch-tone signals on an outside call over a rotary line.
45 Voice Mail
Message
This feature is available only if you have a voice messaging system. It is available only on system
phones. Lets callers leave voice mail messages to called extension.
●
46 Voice Mail Box
Transfer
This feature is available only if you have a voice messaging system. It is available only on system
phones. This feature lets a system phone user transfer a caller directly to a specific extension’s
voice mailbox, in order for a caller to leave a message without first ringing the extension.
47 Auto Dial Buttons Places a call to an outside telephone number. Outside telephone numbers can be up to 28 digits. If
a dial-out code is required to dial outside numbers (for example, on PBX or Centrex lines), include
it in the stored number followed by pauses, if necessary.
Write in Numbers here: