Avaya 4610SW IP Phone User Manual


 
Local Administrative Options
52 4600 Series IP Telephone Release 2.2 Installation Guide
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons. The 4630/4630SW IP Telephones and the 4690 IP Conference
Telephone do not have a dedicated Hold button. For all other 4600 Series IP
Telephones, pressing the Hold button instead of the Mute button also works.
The 4601 IP Telephone flashes both Message Waiting indicators 500 milliseconds on, 500
milliseconds off to indicate user input is expected. All other IP telephones display the
following text left-justified at the top of the display:
!
CAUTION:
CAUTION: As soon as you press the # button, all static information will be erased, without
any possibility of recovering the data.
2. If you do not want to reset the system values, press * (no) and proceed to Step 4.
Pressing the pound sign (#) to reset the system values on a 4601 IP Telephone produces a
confirmation tone. The 4601’s Message Waiting indicators illuminate, but do not flash, to
indicate no entry is allowed while the system values are being reset. All other phones
display a screen with the following prompt on the top line:
3. Press the * button to continue without resetting the values and proceed to Step 4. Or, press
the # button to reset values to their defaults.
All phones except the 4601 display the following text left-justified at the top of the display
while the system values are reset to defaults:
The telephone resets from the beginning of registration, which takes a few minutes.
4. If you do not reset the phone, all IP telephones except the 4601 display the following
prompt:
5. Press the * key to terminate the procedure without restarting the telephone. Otherwise,
press # and perform the following Restart procedure.
Reset values?
*=no #=yes
Are you sure?
*=no #=yes
Resetting
values.
Restart
phone?
*=no #=yes