Avaya 4610SW IP Phone User Manual


 
Pre-Installation Checklist
Issue 2.2 April 2005 15
Pre-Installation Checklist
Before plugging in the 4600 Series IP Telephone, verify that all the following requirements are
met. Failure to do so prevents the telephone from working and can have a negative impact on
the network. Print copies of this checklist for each server and IP telephone.
Requirements to Verify about the Network
1. The Avaya Media Server is administered for IP telephones and has software for
Release 8.4 or later. Avaya Communication Manager Release 1.1 supports the
4602 and 4620/4620SW IP Telephones. The recommended configuration is the
latest PBX software and the latest IP telephone firmware. In the event you are
installing at a site without the latest PBX software, follow these recommendations:
Media Server
Release
Avaya IP
Telephone
IP Telephone
Release Notes
Avaya
Communication
Manager 1.3+
All
telephones
R1.8+ Use the latest release.
Avaya
Communication
Manager 1.1,
Avaya
Communication
Manager 1.2
All
telephones
except 4630
R1.8+ Use the latest release.
R10, Avaya
Communication
Manager 1.1,
Avaya
Communication
Manager 1.2
4630 R1.74 Upgrade to Avaya
Communication Manager
Release 1.3 or later before
installing R1.8 on 4630
Telephones.
R10 4606, 4612,
4624
R1.8+ The 4602 and 4620 are not
supported.
R9.5 4606, 4612,
4624
R1.8+ The 4620, 4602, and 4630
are not supported. R1.5 is
the minimum 4600 IP
Telephone vintage.
R9 4612, 4624 R1.1 R1.1 is the only supported
4600 IP Telephone vintage.
R8.4 4612, 4624 R1.0 R1.0 is the only supported
4600 IP Telephone vintage.