Filter
Top Products
About Local Administrative Procedures
Issue 2.2 April 2005 37
About Local Administrative Procedures
Local administrative procedures allow you to customize the 4600 Series IP Telephone
installation for your specific operating environment. This section provides a description of each
local administrative option covered in this guide, with references to the pages on which the
option appears.
In certain procedures,
for example, SSON or
to display the extension
number, a value already
exists and you press
the # button to indicate
you either want to enter
a new value or have the
current value displayed
The Message Waiting indicator at the top of the phone and the
Message button’s LED on the faceplate are lit but not flashing.
Call Appearance Line a alternating with line b after an 1800
millisecond pause, if the value has more than one digit winks
600 milliseconds on, 200 milliseconds off n times for digit n to
indicate the current value. The appropriate Call Appearance
Line indicator flutters five times to indicate the digit zero. After
feedback of the current value, the Message Waiting indicator
at the top of the phone and the Message button’s LED flash
500 milliseconds on, 500 milliseconds off to indicate user input
is expected/required.
User input is not
allowed for example,
during processing
The Message Waiting indicator at the top of the phone and the
Message button LED on the faceplate are steadily lit.
The telephone’s boot
image is in the process
of being upgraded
All LEDs, meaning Call Appearance Lines a and b, and both
Message indicators, light steadily during the download
process.
An error beep tone
sounds
An invalid button was pressed. Try again.
If Then (continued)
2 of 2
Local Programming Option Code See
Static addressing A D D R (2 3 3 7) Static Addressing
Installation on page 39
Quality of Service options Q O S (7 6 7) QoS Option Setting on
page 43
PC Ethernet Interface I N T (4 6 8) Interface Control
on
page 45
1 of 2