Filter
Top Products
Stored Number (View)
Issue 1 July 2001
5-17
Stored Number (View)
The Stored Number feature lets you display:
■ The numbers stored in Abbreviated Dialing (AD) locations
■ The number you last dialed
Viewing either the last number dialed or
a number stored on an AD button
1. If one has been programmed by your System Administrator, press the View
Line/Feature button.
2. To view the last number dialed, press ,
or
To view the number stored on an Abbreviated Dialing button, press the
applicable AD Line/Feature button.
The associated telephone number displays.
3. To return to call handling mode, press Exit or, to see another
feature/number, repeat this procedure from Step 2.
Timer
The Timer (display) feature lets you measure elapsed time.
Viewing elapsed time (hours, minutes, seconds)
1. Press the Line/Feature button your System Administrator has programmed
for the Timer feature.
The elapsed time displays.
2. To stop the Timer and clear the display, press the button your System
Administrator has programmed for the Timer feature again.
The time elapsed since initiating the Timer displays for about three
seconds, then disappears.