Filter
Top Products
Issue 1 July 2001 5-1
5
IP Telephone Features
Introduction
This chapter contains procedures for using DEFINITY
®
phone features.
Depending on how your 4606 IP Telephone was set up by your System
Administrator, you can access some or all of the features discussed in this chapter
using Line/Feature buttons or Feature Access Codes.
We cover feature access methods in the next section. Following that section, a
“Feature List” provides a reference to the procedures for activating and using
features, which are then listed in alphabetical order.
Check with your System Administrator for the configuration of your phone system.
Accessing IP Telephone Features
Your 4606 IP Telephone provides two ways to access IP Telephone features:
1. Your System Administrator may have programmed some of your
telephone's Line/Feature buttons to automatically access a feature when
pressed.
In some cases, features activated via Line/Feature buttons have a
"steady green" indicator light to signify active status. When the feature is
deactivated (turned off), the indicator light goes off.
NOTE:
Note that because the DEFINITY 4606 IP Telephone has just six
line/feature buttons, button-activated features may be limited.
2. If you don't have a button administered on your phone for a specific feature,
you may be able to access a feature by entering a two or three digit Feature
Access code using the number pad. Note that the procedures in this
chapter often provide information about using access codes for applicable
features. Your System Administrator assigns access codes.