Avaya 4602SW IP Phone User Manual


 
Troubleshooting Guidelines
70 4600 Series IP Telephone Release 2.2 Installation Guide
System busy CAUSE: Most likely, the number of IP endpoints on the PBX is already
at maximum, Less likely, network resource is unavailable.
RESOLUTION: The telephone was attempting to access a network
resource (DHCP server, TFTP server, HTTP server, or the PBX) and
was not successful. Check the resource being called upon for its
availability. If the resource appears operational and properly linked to
the network, verify that addressing is accurate and that a communication
path exists in both directions between the telephone and the resource.
System Error CAUSE: The PBX has an unspecified problem.
RESOLUTION: Consult your Avaya Media Server administration and
troubleshooting documentation.
Timeout Error CAUSE: Protocol timeout error.
RESOLUTION: Retry. If failure continues, check network congestion,
addresses, etc. to identify cause of timeout.
Undefined
Error
CAUSE: The PBX has rejected registration for an unspecified reason.
RESOLUTION: Consult your Avaya Media Server administration and
troubleshooting documentation.
Resource Error CAUSE: The PBX rejects the registration request.
RESOLUTION: Verify administration to ensure the telephone’s proper
IP address, extension, and password are being used.
Wrong Set Type CAUSE: The PBX does not recognize the set type.
RESOLUTION: Ensure the PBX is properly administered to expect the
appropriate telephone for the IP address and extension.
Table 2: Possible Error and Status Messages During Installation of 4600 Series IP
Telephones (continued)
Message Cause/Resolution
4 of 4