Filter
Top Products
QoS Option Setting
Issue 2.2 April 2005 43
QoS Option Setting
Use the following procedure to set Quality of Service (QoS) options.
Note:
Note: The 4601 IP Telephone does not support QoS Option Setting.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 7 6 7 # (Mute Q O S #)
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons. The 4630 and 4630SW IP Telephones and the 4690 IP Conference
Telephone do not have a dedicated Hold button. For all other 4600 Series IP
Telephones, pressing the Hold button instead of the Mute button also works.
The following text displays left-justified at the top of the display:
where d is the value of the 802.1 audio parameter.
2. Enter a valid value between 0 and 7 for the new value of the 802.1 audio parameter.
The following text displays left-justified at the top of the display:
where d is the value of the 802.1 signaling parameter.
3. Enter a valid value between 0 and 7 for the new value of the 802.1 signaling parameter.
The following text displays left-justified at the top of the display:
where dd is the value of the Differential Services audio parameter.
L2 audio=d
New=_
L2 signaling=d
New=_
L3 audio=dd
New=_