Avaya 4602SW IP Phone User Manual


 
Pre-Installation Checklist
Issue 2.2 April 2005 17
Note:
Note: The 4630 IP Telephone does not support IEEE-standard power, and therefore
requires the Power Module.
The 4690 IP Conference Telephone is powered with a special LAN/power cable
with a power interface module included with this phone.
Requirements to Verify for Each IP Telephone
10. You have an extension number and an Avaya Communication Manager security
code (password) for each IP telephone.
11. A Category 5e LAN jack is available at each phone site.
12. Electrical power is provided to each telephone by a Telephone Power Module (DC
power jack) (must be ordered separately). If the LAN will supply IEEE-standard
power to the 4601/4602/4602SW/4606/4610SW/4612/4620/4620SW/4621SW/
4622SW/4624/4625SW/4630SW, no power module is required.
13. 1 Category 5e modular line cord is available for the connection between the IP
telephone and the PC.
14. Verify that the 4600 Series IP Telephone package includes the following
components:
1 telephone set
1 telephone handset, except the 4622SW and 4690 IP Conference
Telephones
1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord,
plugged into the telephone and the handset, except the 4690 IP Conference
Telephone
1 Category 5 modular line cord for the connection from the IP telephone to
the Ethernet wall jack
4600 Series IP Telephone Safety Instructions (555-233-779)
Power Brick for 4630 IP Telephones only
Stylus for 4630/4630SW IP Telephones only
Power Interface Module for the 4690 IP Conference Telephone only
Optional Items for Some IP Telephones
15. If applicable to your current installation, verify that the following equipment/
information is present:
30A Switched Hub (applicable to the 4612/4624/4630 only)
Stand Instructions, packaged with certain IP Telephones