Filter
Top Products
4600 Series IP Telephone LAN Administrator’s Guide
The View Administration Option
5-10
2. Press the # button to reset values to their defaults, or * to continue.
If you press the # button, the following text is displayed left-justified at the top of the display
while the system values are reset to defaults:
Once the system values are reset, the following prompt is displayed:
3. Press the * key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files.
Refer to Appendix A of the 4600 Series IP Telephone Installation Guide.
The View Administration Option 5
If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
The following text displays left-justified at the top of the display:
Resetting
values.
Restart phone?
*=no #=yes
Also use the ADDR option to view IP addresses (see “Static Addressing Installation” in
Chapter 3 of 4600 Series IP Telephone Installation Guide). These may have been
entered incorrectly. Verify whether you were provided with correct IP addresses.
If PROCPSWD has been administered as indicated in Server Administration, on page
4-1, you need to type the Local Procedure password after pressing Mute and before
pressing V I E W.
Press the Mute key momentarily. Do not press this key while pressing other keys.
The 4630 IP Telephone does not have a dedicated Hold button; for all other 4600
Series IP Telephones, pressing the Hold button instead of the Mute button will also
work.
View settings
*=next #=exit