Filter
Top Products
4600 Series IP Telephone LAN Administrator’s Guide
Customizing the 4630/4630SW IP Telephone
4-38
If the Automatic Backup option is set to "No," speed dial data, options and parameter settings are
not saved unless the user forces a one-time backup via the appropriate option (as covered in
Chapter 8 of the 4630 IP Telephone User’s Guide). Restoring backed-up data is done via a
separate user option, also covered in Chapter 8 of the 4630 IP Telephone User’s Guide.
Call Log Archive 4
Automatic archiving of the Call Log occurs when:
The Call Log Automatic Archive option setting is "Yes" and
The Call Log is more than 50% filled with unarchived entries, or a new (unarchived) log entry
occurs within two hours of the last archive (whichever occurs first).
Call Log Archive automatically saves applicable Call Log entries. When the Call Log Automatic
Archive option on a 4630/4630SW IP Telephone is set to “Yes” and the FTPSRVR is specified, the
FTP APPE command attempts to save all call log contents to the FTP server (specified by
FTPSRVR in the directory path specified by FTPDIR). Data is saved in a file called
“4630calllog.txt”. The System Administrator may optionally specify FTPSRVR and/or FPTDIR via
network administration, however, these values may also be specified by the phone’s user as
covered in Chapter 8 of the 4630/4630SW IP Telephone User’s Guide. Automatic backup occurs
whenever the user executes a Save command on a Speed Dial or Options/Parameter screen.
Stock Ticker Active? Option
STK.mm Parameter
Stock Index DJIA Option
Stock Index S&P 500 Option
Stock Index Nasdaq Option
Stock Change Option
Stock Volume Option
For specific error messages relating to Backup/Restore, see Table , on page 5-14.
For specific error messages relating to Archiving, see Table , on page 5-14.
Setting/Parameter Name Type