Filter
Top Products
Hold, Park & Transfer Page 17
Holding Calls
The system automatically reconnects held calls after a set period, the
default setting is 2 minutes.
To display held calls:
1. An H on your display indicates that you have a held call.
2. Press Menu
twice.
3. Select HC&P (held, conference and parked).
4. The
above Helds indicates that there are held calls. Select Helds.
5. If you have several held calls you can use the
and keys to the details
of the different held calls.
• To clear a held call: Select Drop.
• To reconnect a held call: Select Pickup.
Transfer a Call
To transfer a call:
1. During the call, press Trnsfr
. The call is put on hold.
2. Dial the number to which you want to transfer the call.
• If the extension doesn't answer or doesn't want the call press the
call appearance button to return to the original call.
• If the extension answers and will accept the transfer press Transfr
again.
• To do a blind transfer, hang up the call or hit the transfer button
again.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones Page 17
IP Office 40DHB0002USAL - Issue 6 (04/25/2003)