Filter
Top Products
Other Call Controls Page 12
Drop a Call
You can use this function to disconnect a caller. This feature can also be
used with conferencing - See "Conferencing Calls" on page 13.
4406D+ and 4606D+ sets should have a Drop button programmed on the
phone. Contact your system administrator to do this.
To drop a call
:.
1. Press Menu
.
2. Select Drop (This feature can also be set under a DSS key, see page
22).
or
1. Press Menu
twice.
2. Select Func and then select Drop.
Mute a Call
The Mute key allows you to stop the caller from hearing you while still
allowing you to hear them. While a call is muted, the lamp above the Mute
key is on (on the 6400 sets) and flashing (on 4400 and 4600 sets).
On the 4400 sets, when headset mode is active (see Using Headsets on
Page 19), the Mute button works for the Headset.
Display the Call History
The number shown in the right-hand of the phone display when idle is the
number of incoming calls stored in your phone's call history. These are calls
that have rung your phone (answered or unanswered) for which a CLI was
available. The phone can store the 32 most recent calls.
The redial facility allows you to see a record of the outgoing calls dialed
from your phone, see "Redial" on page 7.
Call History is not available on the 4406D+, 4606D+ and TransTalk
®
MDW
9040 sets.
To display the call history:
1. Press Menu
twice.
2. Press
and then select Hist.
3. The display shows the time, date and number of the caller. Use the
and
keys to display the details of different callers.
4. You can then select to either callback the caller or delete the call from
the call history.
• To delete the call from call history: Select Delet.
• To call the caller: Select Call.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones Page 12
IP Office 40DHB0002USAL - Issue 6 (04/25/2003)