Filter
Top Products
46 Avaya 1010/1020 User Guide
Adjusting the Active Microphone Volume
To control the volume of the active microphone, adjust the Active Microphone Volume
preference in User Preferences or Administrator Preferences : Audio. For Information
about using audio meters to set the volume, refer to “Managing Audio” on page 18.
Checking Microphone Status
The Active Microphone field in the System Information page shows which device is
functioning as the active microphone. When the value is None, the No Active Microphone
indicator appears in the status bar indicating that no active microphone is available.
The Microphone In field appears in the System Information page for systems that have a
microphone in connector on the codec and indicates the connection status of a device for
the input (None, Ready, or Error).
Testing Primary Audio Output
You can send audio test tones to speakers that are connected to the codec as the primary
audio output device. Navigate to Administrator Preferences : Audio : Primary Audio
Output Test. Select a channel to test, or select Auto. The Auto option cycles through all
available channels, playing the test tone for 5 seconds before moving to the next available
channel. To end the test, choose Off or navigate to another preference or screen.
Adjusting Audio Levels
In addition to adjusting the audio volume for line in and the active microphone, you can
adjust levels associated with the following preferences:
• Line Out Treble (dB)—Boost the higher frequencies in the sound range for audio
output.
• Line Out Bass (dB)—Boost the lower frequencies in the sound range for audio output.
• Ring Tone Volume—Select the volume level of the ring and busy tones
.
• DTMF Tone Volume—Select the volume level of the DTMF and key click tones.
• Status Tone Volume—Select the volume level of status tones.
• System Ringer Volume—Select the volume level of the system ringer.
• System Ringer Tone—Select one of five preset system ringer tones.