Avaya 1010 Conference Phone User Manual


 
Avaya 1010/1020 User Guide 9
The navigation bar is a grey bar that appears below the system status bar. The
navigation bar contains icons that correspond to buttons on the remote control and text
that describes the action a button performs. The icons and text change depending on
how you use the system. The quick reference card Getting Started with your Avaya
Video System shows you how to perform common tasks with the remote control.
Note: Pressing and holding any button except the OK button on the remote control
may cause the command associated with the button to repeat.
Indicates that the system is initializing. When the system is initializing,
functionality on the main screen is disabled and no entries appear in the
REDIAL list. This icon also appears when a new device is connected to
the system after the system boots and disappears when the device is
ready. If the icon persists, a problem has occurred and rebooting the
system is necessary.
Indicates that the system does not have an active microphone. Contact
your administrator.
Network
Status
Identifies the network status, as follows:
connected (green indicator)
in progress (yellow indicator)
disconnected (red indicator)
System
Overheating
This yellow indicator warns you when the system temperature is
above normal operating temperature. The codec adjusts fan
speed automatically to cool itself.
This red indicator warns that the system is overheated and
approaching the maximum allowed operating temperature and
will automatically reboot after reaching it.
Warning: Temperatures that require the codec to reboot can
permanently damage codec components. Ensure the room that
houses the codec is properly ventilated and temperature controlled.
SIP server
registration
status
When SIP is configured as the protocol for placing calls, this indicator
identifies the registration status of the Avaya system with the SIP server
as follows:
in progress (yellow indicator)
registration failed (red indicator)
Contact your administrator.
Icon Condition