Filter
Top Products
Settings
81
The "H" refers to the request key with hook flash-
function. You can enter up to 15 characters.
PABX ...................................... >>
Prefix ........................... Enter your prefix for the public telephone network
(e.g. 0) here. This prefix is dialled automatically be-
fore each call number unless the call number is
marked with an "i" as an internal call number within
the PABX.
CLIP correction ......... Some PABX systems add in numbers before the re-
ceived call number. This produces incorrect mes-
sages for the received call number. In order to rec-
ognise the additional numbers and to cut them off
you can enter them here.
Call-back code ........... Enter your call-back code for your PABX (e.g. 79)
here. You can enter up to 15 characters.
Message tone ........................ Volume levels 1 to 4 or off. If you activate the sound
by setting the volume each time a new ICM is re-
ceived a message tone sounds every 10 seconds.
Contrast ................................. You can set the screen contrast in up to 16 steps
here.
Brightness .............................. You can set the screen brightness in up to 16 steps
here.
Backlight ................................ Automatic or on. For the "automatic" setting the
backlight is switched off automatically after 10 sec-
onds. If you want the backlight on continuously, se-
lect "On".