Filter
Top Products
Telephone book
38
Automatic redialling /Automatic call back when engaged
(CCBS)
If the person you are trying to call is constantly engaged your Voicemail Center 461.2
can take over by repeatedly trying to call the other person. For automatic re-dialling if
the caller is engaged there is a pause and the device repeats the dialling up to 10
times. With the "Call back if engaged" function a call is signalled to you as soon as
the person you are trying to reach is free. Your telephone network or extension sys-
tem must support this function (refer also to your network operator and PABX
manufacturer user instructions). To activate "Call back on busy" you usually dial a
certain combination of digits (e.g. Hook flash *37#). The combination of digits must
be pre-entered as described in "Settings/Call back code" (Page 80).
You call someone and the number
is engaged.
"Subscriber busy" is displayed.
To start automatic re-dialling press
the selection button next to the re-
dial symbol.
After the pre-set time the dialling is re-
peated up to 10 times.
oder
To start automatic call back, press
the selection button next to the call
back symbol.
As soon as the person you called has
hung up the call back is signalled to you.
Accept the call by lifting the re-
ceiver.
You can have your conversation.
You do not want automatic re-dial
or call back on busy. Press stop, lift
the receiver or simply wait 10 sec-
onds.
The initial state is again displayed.