Filter
Top Products
Call forwarding
67
Press menu. The main menu is displayed.
Search for the "Call forwarding"
entry using the control buttons
(up/down).
Press the selection button next to
"Call forwarding".
The call forwarding menu is shown in the
display.
Press the selection button next to
the setting that you wish to change.
The cursor is located at the entry point.
Select the desired entry location
using the control buttons (left/right)
and change it with the control but-
tons (up/down).
The display shows the current setting.
or
When entering the target call num-
ber set the first digit using the con-
trol buttons (up/down).
Digits and special symbols are dis-
played. The special symbols have the
following meanings:
~ = Wait for dial tone / 3 Sec. pause
i = Internal (for PABX)
F = Flash (short, for PABX)
H = Hook flash (long, for PABX)