Filter
Top Products
To change Outcalling settings, follow the procedure below:
Step 1
Step 2
Step 3
On/off
Review
Instructions
Program
Numbers
Schedule
Delay
Cycles
Activity
Menu
Log into Voice Mail.
Press [6]
to administer Outcalling.
Choose an option:
Press [1]
to turn Outcalling on/off.
Press [2]
to review your list of Outcalling numbers.
Press [3]
to listen to instructions on entering
Outcalling numbers.
Press [4]
to change your list of Outcalling numbers.
.
NOTE:
Use [*]
for a 1.5 second pause in the Outcalling number.
Press [5]
to change your Outcalling schedule.
(Factory setting: all hours)
Press [6] to change the minimum time between
Outcalling attempts.
(Factory setting: 15 minutes; Range: 5-99 minutes)
Press [7]
to change the number of Outcalling cycles.
(Factory setting: 3 cycles; Range: 1-9 cycles)
Press [*] [#] to return to the Voice Mail Activity Menu.
Outcalling Numbers
To program Outcalling numbers you should follow the guidelines below:
For a standard telephone number or a voice pager number:
■ Enter digits ([0] - [9]), pauses ([*]), and pound signs ([#]) required
to place the call; include any access numbers needed.
Example: [9] [*] [1] [8] [0] [0] [5] [5] [5] [2] [0] [2] [0]
■ Enter [*] [#] to signal the end of the number.
For a digital pager or beeper number:
Enter digits ([0]
- [9]) and pauses ([*]) or pound signs ([#]) required
to place the call; include any access numbers needed.
Example: To specify an access number, a 1.5 second pause, the
paging service number (555-1234), a 4.5 second pause, a PIN
(1234) followed by a # and a callback number (555-3456) followed
by a # enter:
[9] [*] [5] [5] [5] [1] [2] [3] [4] [*] [*] [*] [1] [2] [3] [4] [#] [5] [5] [5] [3] [4] [5] [6] [#]
Enter [*] [#] to signal the end of the number.
15