Filter
Top Products
Getting started
Telephone base installation
IMPORTANT INFORMATION
Use only the power adapter supplied with this product. To order a replacement power adapter, visit
our website at www.telephones.att.com, or call 1 (888) 915-2007.
In Canada dial 1 (866) 288-4268.
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
1.
2.
To connect the corded handset and power adapter to the telephone base
Plug the other end of the
coiled handset cord into
the corded handset.
Plug one end of the coiled
handset cord into the
HANDSET jack on the left
side of the telephone.
Plug the small end of the power adapter
into the power jack at the bottom of the
telephone base. Route the power adapter
cord through the slot on the bottom of
the telephone.
Plug the large end of the
power adapter into a power
outlet not controlled by a
wall switch.
NOTE: For complete instructions on installing the cordless handset, see Add and register
handsets on page 10 of this user’s manual, refer to the AT&T SB67108 user’s manual or visit
www.telephones.att.com to download the manual.
6
Raise the two antennas for
optimum wireless range and
performance. For greater
range, add optional repeaters
(AT&T model SB67128).