AT&T E5827 Cordless Telephone User Manual


 
47
Appendix
“Beep-Beep...Beep-Beep...”
(Double beep every five
seconds)
Handset battery is low. Place
handset in charger to charge the
battery.
“Beeeeeeeeep”
(one long beep)
Confirmation tone (current oper-
ation has been successfully com-
pleted).
“Beep-Beep-Beep-Beep-
Beep”
(five quick beeps)
Error tone (current operation has
been unsuccessful; try again).
Indicator lights & alert tones
Alert tones
Indicator lights
ANSWER ON
On: Answering system
is on.
Off: Answering system
is off.
IN USE
Steady: Line is in use.
Flashing: Call is on
hold (Also flashes in
cadence with ringing to
announce an incoming
call).
SPEAKER
On when speaker-
phone or intercom
is in use.
CHARGE
On when the hand-
set is charging in
charger.
“Siren”
(Alternating tones)
Handset is being paged.
“Beep”
(One beep every 10 sec-
onds)
Message alert at the telephone
base (there are new messages).
“Beep-Beep ”
(Two beeps)
The volume level is at the maxi-
mum or minimum setting.