Filter
Top Products
40
Answering system operation
1.
SETUP
3.
SETUP
-OR-
Press until desired fea-
ture is heard (see list at
right).
Press until desired selec-
tion is heard.
Press to set selection
and move to next menu
option.
Press to set selection
and exit menu.
2.
SKIP or
REPEAT
PLAY/STOP
Changing feature options
Menu features can be changed to program how the
answering system operates. Press SETUP repeatedly
to hear each feature. When you hear the feature
you want to modify press SKIP or REPEAT then
SETUP to change the setting. Press PLAY/STOP to
confirm the setting and exit the menu.
Feature options (Default settings underlined).
System announces: Feature description:
"Number of rings," current
setting, then "To change
the setting press SKIP
or REPEAT; to continue
setup, press SETUP."
Options: 2/4/6/toll saver
“Call screening,” current
setting, then “To change
the setting, press SKIP
or REPEAT; to continue
setup, press SETUP.”
Options: on/off
"Remote access code,” cur-
rent setting, then “To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP.”
Options: (select a two-digit
code) 19
“Message alert tone,” cur-
rent setting, then “To
change the setting, press
SKIP or REPEAT; to con-
tinue setup, press SETUP.”
Options: on/off
Choose number of rings before the
system answers a call. When toll
saver is active, the system answers
after two rings if you have new
messages, and after four rings if
you have no new messages. When
retrieving messages from a long
distance call, you may disconnect
your call after three rings so that
there will be no long distance
charge incurred.
When on, you can hear callers
leave messages, or answer the call.
Enter a two-digit number (10-99)
for remote access from another
telephone (page 45).
When on, the telephone beeps
every 10 seconds when there are
new messages.
NOTE: Press and hold SKIP or REPEAT to increase
or decrease the remote access code number by increments of
10.
16