AT&T 7406 Telephone User Manual


 
To cancel a Leave Word
Press [
CanceI LWC ]
Calling message
or Dial Leave Word Calling Cancel code
Note: You cannot cancel
1
[dial tone]
a message left for an
2 Dial extension
[confirmation tone]
AUDIX subscriber.
Note: If reorder tone is heard, message is not
canceled; try again.
Message
To retrieve a message
If your set has a display, see the Message Retrieval
when your Message light
procedures under the Display Features heading.
is on
Otherwise, see your System Manager for instructions
regarding your local message retrieval procedures.
1
Mute
Note: When you are talking on the handset, the Mute feature affects the
microphone associated with the handset rather than the speakerphone.
This feature has no effect on an external speakerphone attached to the voice
terminal.
To prevent the other
Press [
Mute ]
1
party from hearing you
(To mute the
Red light goes on and other party cannot hear
speakerphone
you
microphone)
When you are ready to resume conversation with the
other party, press [
Mute ] again
2
Red light goes off and other party can hear you
again
Note: When the voice terminal is set for the Speaker
(listen-only) feature, the Mute feature is activated and
the light next to [
Mute ] goes on whenever you are using
the speaker.
The Mute feature turns off automatically when you hang
up, or switch from the speakerphone to the handset or
from the handset to the speakerphone.
20