Filter
Top Products
To place an AD call Press selected [ AD xxxxx ]
[ringback tone]
Press [
Select ] first if the [ AD xxxxx ] is top-labeled
on a 2-level button
Call is dialed (silently)
●
●
To program/reprogram
an outside number,
extension, or feature code
into a personal list
1
2
1
2
3
4
5
6
7
8
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal lists(s) (see
example to the left)
Note: Each phone number or feature code is stored
as a separate item.
Pick up handset
[dial tone]
Note: If you are using the speakerphone, you must
press a call appearance button before you begin
Step 3.
Press [
Program
]
or Dial AD Program code
[dial tone]
Dial Personal List number (1, 2, or 3)
[dial tone]
Dial list item
(1, 2, 3...)
[dial tone]
Dial number you want to store (up to 24 digits)
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
Press [
# ]
[confirmation tone]
Repeat Steps 5–7 if you want to program
additional items on the same list; press [
Drop Test
]
and begin again at Step 1 if you want to program
items on another list.
Hang up or press [
Drop Test
] to end programming
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this booklet;
group, system, and enhanced lists can be obtained
from your System Manager.
12