![](http://pdfasset.owneriq.net/0/a4/0a4030ec-b595-b094-a178-06781fcc3896/0a4030ec-b595-b094-a178-06781fcc3896-bg13.png)
EN
18
If you miss a call, ‘MISSED CALL’ will appear with the time of the last
call received. After you reviewed the call log, the MISSED CALL record
will disappear. To view your MISSED CALL, use
or to enter and
browse the call log (see the section in this manual titled VIEWING AND
CALLING CALLER ID RECORDS Page 15 for more details).
When you view the Caller ID of your missed calls, the following notifications
will appear:
•
‘NEW’ indicates that the call details have not previously been
reviewed.
•
‘REPT’ indicates that you have received repeat calls from this same
number.
You can store your voice mail access number for easy one-touch dialing
using the
key. Your voice mail access number is stored in your
Phonebook under the name ‘VMAIL’
To program your voice mail number:
1. Press the key. When the key is pressed, and there is no
voice mail number programmed, the unit will momentarily display ‘NO
VMAIL SET’ and will then display VMAIL NUMBER to prompt you to
enter your voice mail number into the phonebook record.
2. Once you have stored your voice mail number, press the
key
to automatically dial your voice mail service to access you messages.
3. If you would like to automatically enter your PIN code, press the
key to create a pause then enter your PIN. ‘P’ will appear on
the screen to indicate where the pause will occur. More than one
pause entry may be necessary. (For additional information on storing
numbers in the Phonebook, see the section in this manual titled
PHONEBOOK - on Page 12.)
4. Touch
to confirm
VOICE MAIL
PROGRAMMING VOICE MAIL ACCESS NUMBER
MISSED CALLS