AltiGen comm AltiTouch 500 Telephone User Manual


 
AltiTouch 500 Manual 24
Check all line cord connections at the wall jack and at the telephone.
If the line does not enable caller ID, this service cannot receive caller
ID information. Make sure that the AltiGen phone system has
activated it in your line and the caller ID format is either SDMF or
MDMF.
The phone receives call information between the 1st and 2nd ring. If
the caller hangs up or you answer before the 2nd ring, the phone may
not receive the call ID information.
Important:If you continue to have problems, contact your local AltiGen
dealer for service.