Filter
Top Products
AltiTouch 500 Manual 16
1. Press the Save buttonwhenthedisplay
shows no caller's number or name. The
“SAVE TO?” prompt appears on the
display.
2. Press the Directory button, the
“ENTER NUMBER>”prompt
appears on the display.
3. Use the keypad to enter the telephone
number, including trunk access code
and the long distance prefix that you
need to dial this number. Insert a pause
or multiple pauses where required by
using the Pause button. Then press the Save button.
Note: If you need to dial an outside number, you will need to include
the trunk access code in the phone number you entered.
4. The third line of LCD alternately
displays the entered number and “USE
SAVE TO END.”
5. Use the keypad to input the first
character of the name. The number and
letters on each telephone button are displayed in turn.
6. When the desired character is displayed, you can enter the next
character.
7. If you have to use the same button to enter the next character, press the
$ button to move the cursor to the next position and enter the next
character.
8. If you will use a different button to enter the next character, simply
press that button. The cursor will move to the next position
automatically.
9. To insert a space, the $ button to move the cursor to the right.
10. To re-enter a character, press the "button or the $buttontomovethe
cursor to the character you wish to modify.
11. After entering all characters, press the Save button to save this
number/name in the directory.