AltiGen comm AltiTouch 500 Telephone User Manual


 
AltiTouch 500 Manual 12
Adjusting Handset Receiver Volume
When the phone is connected, the volume for the handset can be adjusted
from level 1 to 4. To adjust the handset receiver volume:
1. Lift the handset and listen to the dial tone.
2. Press the right side of the Volume button to increase the receiver
volume. Press the left side of the Volume button to decrease the
receiver volume. Volume level is displayed on the LCD.
3. Replace the handset when the desired receiver volume is reached.
Note: The volume will reset to level 2 after the phone hangs up.
Adjusting Headset Receiver Volume
When the phone is connected, the volume for the headset can be adjusted
from level 1 to 4.
Note: If you wish to use a headset with this telephone, get one with the
2.5 MM. plug. We recommend a headset without built-in
amplifier. Amplifier for adjusting headset receiver volume is built
into this telephone.
To adjust headset receiver volume:
1. Press the Headset button and listen to the dial tone.
2. Press the right side of the Volume button to increase the receiver
volume. Press the left side of the Volume button to decrease the
receiver volume. Volume level is displayed on the LCD.
3. Press the Headset button or the Goodbye button when the
desired receiver volume is reached.
Note: The volume will reset to level 2 after the phone hangs up.
Adjusting Speakerphone Receiver Volume
To adjust the speakerphone receiver volume:
1. Press the Speaker button and listen to the dial tone.
2. Press the left/right Volume buttons to raise or lower the Volume Level
from 1 to 8,asshownontheLCD.
3. Press the Speaker button or the Goodbye button when the desired
receiver volume is reached.