Filter
Top Products
AltiTouch 500 Manual 23
1. Basic reset
— Disconnect the telephone line cord from the phone.
— Disconnect the AC adapter from the phone.
—Pressthe"button or the $ button two times. Wait for 10 seconds;
— Reconnect the telephone line cord and the AC adapter to the phone.
— Follow the installation procedures to select the language and to
enter the area codes.
2. Full reset—If the basic reset cannot return to the phone to the normal
operating condition, you must do a full reset. All information stored in
memory will be erased during a full reset.
— Disconnect the telephone line cord from the phone.
— Disconnect the AC adapter from the phone. If back up
•Pressthe"button or the $ button two times. Wait for 10
seconds.
•PressandholdtheDelete button and the "buttons when
reconnecting the AC adapter to the phone.
— Reconnect the telephone line cord.
— Follow the Installation procedures to select the language and to
enter the area codes.
Maintenance Information
Although your unit is designed to be maintenance free, it contains sensitive
electronic parts. Treat it with care to assure the best performance.
Avoid Rough Treatment: Avoid dropping the unit. The original
packaging should be used for protection if you must ship the unit. Dropping
or damaging the unit will void the warranty.
Cleaning: The hard plastic casing on your unit has a durable finish that
should retain its original luster for many years. Clean exposed parts with a
soft, slightly damp cloth. To remove stains, use a mild soap. Never use
detergents, excess water, treated cloths, harsh cleaning agents, or sprays.
Troubleshooting
If your product does not work properly, try the following suggestions
before seeking repair assistance: