Filter
Top Products
Alti-IP 600H Manual 15
• IP subnet mask
• Default gateway IP address
4. Configuring the AltiWare IP Settings
If you are using Gatekeeper Auto Discovery, you do not need to
configure anything. Proceed to Step 6.
If you are not using Gatekeeper Auto Discovery, you must manually
configure the AltiWare IP address setting into the Alti-IP 600H. Refer
to “Configuring IP Settings” on page 26.
5. Activate the IP Extension
Once the device is initialized, the user must follow these steps to
activate the IP Extension.
Note: The user must be running AltiGen’s Gatekeeper service for full
functionality.
a. With the handset onhook, press # 27, then the ENTER button.
b. Enter your extension number and password when prompted.
c. The phone will attempt to register as shown in the LCD screen.
If the phone successfully passes through these stages, the phone shows
the time and extension in the LCD screen and is now in normal
operating mode.
Otherwise, refer to “Troubleshooting” on page 40.