Aiphone IS Intercom System User Manual


 
26
Transferring to another master station
You can transfer a call received from a sub station to another
master station while communicating with it (communication
transferring), as well as setting calls to be automatically
transferred in the "INITIAL SETTING".
For a call from another master station, you can transfer it
*
when you are communicating with it. However, you cannot
transfer the communication to a remote site.
Communication transferring
Receive a call and communicate with it. (P. 21)
1
Press
2
TRANSFER
.
Press
3
to select the master station in your site
to which you want to transfer the call (so that it is
highlighted) from the list.
Press
4
TALK
or
ZOOM/WIDE
.
While transferring, a sound rings at the source station to
*
indicate a transfer.
Press
5
OFF
to enable the communication between
the station that called you and the transfer target
station.
NOTE:
You cannot transfer a call from a remote site to another remote site.
Call transferring
You can transfer a call to the designated master station (in your
site or a remote site) or the telephone registered to the system
automatically (without answering it) by the "TRANSFER"
settings in the "INITIAL SETTING". (P. 19)
This function is useful when you are absent or you cannot
*
receive and answer a call.
When transferring to a remote site, a master station in the
*
remote site should have been registered as the pilot station
of the site.
The following settings can be made.
1
Transferring a call to the designated master station or
remote site automatically (P. 19 [CALL TRANSFER],
[TRANSFER DESTINA])
2
Setting the delay time of triggering transferring after a call is
received (P. 19 [TRANSFER DELAY])
3
Setting a schedule for call transferring in the System setting
on a PC (P. 19 [SCHEDULE TRANSFER], [SCHEDULE
DESTINA])
4
Transferring a call to telephone automatically (P. 20
[TELEPHONE TRANSFER], [SCHEDULE TEL TRANSFE])
* When both
1
and
3
are set,
3
takes priority.
NOTE:
A call from IS-IPDV, IS-IPDVF or a master station cannot be
transferred to telephone.
Blinks in red.
Appears while the transfer is being performed.
or